QCE Digital Solutions

QCAA Digital Solutions IA1 Technical Proposal: How to Get Top Marks (QCE)

QCAA Digital Solutions IA1 is a technical proposal worth 25% of your QCE Digital Solutions result and marked out of 25. You generate non-coded, low-fidelity prototypes that use an external data source to answer a real-world problem in your Unit 3 technology context, then communicate the technical feasibility of the solution in a multimodal presentation of up to 10 minutes, including annotations of up to 2000 words. The marking guide rewards how you describe user interfaces and existing solutions, analyse the problem, develop possible solutions, and show the relationship between data and user interface in your prototype.

This guide describes Digital Solutions 2025 v1.4 (March 2026), the current syllabus. QCAA's version history dates the start of implementation to 2025. IA1 is one assessment in QCAA Digital Solutions (QCE), and the QCE Digital Solutions study guide sets all four side by side. The task and marking below are current. The commentary is older: the 2022 to 2025 subject reports all describe 2019-syllabus cohorts, when IA1 was worth 20% and marked on different criteria. The 2025 report adds advice on the 2025 syllabus, so report points here are labelled by year.

What is the QCAA Digital Solutions IA1?

Weighting25%
Marked out of25
Where it sitsUnit 3
TechniqueTechnical proposal
Response"Visual, spoken and/or written (including low-fidelity non-coded prototype): up to 10 minutes, including annotations of up to 2000 words"
Class time"approximately 15 hours of class time", as the recommended design
Where you workIn class and in your own time
Individual or groupIndividual

The syllabus describes the task like this: "Students generate non-coded low-fidelity prototypes that use an external data source in response to a real-world problem in the selected Unit 3 technology context. They communicate the technical feasibility of the solution through a multimodal presentation."

The specification asks you to:

  • recognise and describe user-interface components and existing solutions
  • symbolise ideas for user interfaces
  • explain the interrelationships between proposed data structures and user experiences, and useability considerations
  • analyse the problem: its scope, constraints and limitations, possible personal, social and economic impacts, possible solutions, and the relationships between data, programming and user interface
  • analyse information to determine user-experience requirements, programming requirements, required data and success criteria
  • synthesise possible solutions for the data and algorithmic components
  • generate a low-fidelity, non-coded prototype

IA1 assesses objectives 1 to 6 and 8. Objective 7, evaluate, is not on the list. The Unit 3 subject matter is on the topic pages for real-world problems and solution requirements, interactions between users, data and digital systems and innovative digital solutions.

How is Digital Solutions IA1 marked?

The instrument-specific marking guide (ISMG) is printed in the syllabus. It has five criteria and 25 marks. The 2025 subject report describes each descriptor as having one qualifier and a list of elements.

CriterionObjectivesMarks
Comprehending1, 25
Analysing3, 47
Synthesising56
Generating65
Communicating82

Comprehending, 5 marks.

MarksISMG wording
4-5"discerning recognition and description of" user-interface components and existing solutions; "adept symbolisation of" user interfaces; "discerning explanation of" interrelationships between proposed data structures and user experiences, and useability considerations
2-3"adequate" recognition and description; "competent" symbolisation; "adequate" explanation
1"makes statements about features of" components and solutions; "incomplete symbolisation"; "superficial explanation"

Analysing, 7 marks.

MarksISMG wording
6-7"insightful analysis" of the problem and contextual information to identify features and relationships of data, programming and user interface; "astute determination of" programming requirements, user-experience requirements and success criteria
4-5"adequate analysis"; "reasonable determination"
2-3"superficial analysis"; "vague determination"
1"unclear analysis"

Synthesising, 6 marks.

MarksISMG wording
5-6"logical synthesis of information and ideas to develop the possible solutions for" user interfaces, algorithms and data
3-4"adequate synthesis"
1-2"simple synthesis"

Generating, 5 marks.

MarksISMG wording
4-5"effective generation of a non-coded low-fidelity prototype digital solution that demonstrates the proposed relationship between" data and user interfaces
2-3"adequate generation"
1"generation of elements of" the prototype

Communicating, 2 marks.

MarksISMG wording
2"effective decision-making about, and fluent use of" visual, spoken and/or written features, technical language, grammatically accurate structures and referencing conventions
1"simple decision-making about, and inconsistent use of" the same features

The 2025 report: "The Communicating criterion has been reduced to 2 marks with no mark range for the lower performance level." In every criterion, 0 means "The student response does not match any of the descriptors above".

What does Comprehending want in IA1?

Comprehending marks what you recognise and describe (user-interface components and existing solutions), what you symbolise (user interfaces) and what you explain (how your proposed data structures relate to the user experience, and useability considerations).

Look at existing solutions to similar problems. The 2022 and 2025 reports ask for analysis that draws on existing solutions to similar problems, not on one aspect. Existing solutions appear in both the specification and the Comprehending descriptor.

Keep the terms apart. The 2025 report says high-level responses should show the distinction between useability, user experience and visual communication, and warns against equating safety with security or privacy.

Data sources have moved. The 2023, 2024 and 2025 reports, on 2019-syllabus cohorts, rewarded a discerning description of data sources, showing relational and flat file structures and file formats suited to the context. "Data sources" is still in objective 1, but the current Comprehending descriptor names only user-interface components and existing solutions. Data structures now appear through "interrelationships between proposed data structures and user experiences".

How do you reach the top of Analysing?

Analysing is the largest IA1 criterion at 7 marks. At 6-7 it wants "insightful analysis" of the problem and "astute determination of" your requirements and success criteria.

Analyse requirements, don't list them. The 2025 report's advice: "accurate judgments will recognise the difference between responses that list solution requirements or criteria and those that analyse their significance in relation to user needs, constraints and solution goals".

Make user-experience requirements specific. The 2022, 2024 and 2025 reports ask for requirements specific to the identified problem and technology context. The 2025 report adds that "symbolisation should be contextualised to the identified problem rather than generic".

Determine success criteria before you synthesise. The syllabus's problem-solving process (Explore phase) says success criteria are used "to evaluate the personal, social and economic impacts, and quality, appropriateness and effectiveness of the generated component or solution". On cohorts whose 2019 syllabus asked for "prescribed and self-determined criteria", the 2022 report wanted criteria determined through analysis before synthesis, and the 2025 report wanted them specific, measurable and tailored to the problem. The 2025 report suggests coding them, such as "SC1", so you can refer back to each one.

Keep impacts in the analysis. Possible personal, social and economic impacts are part of analysing the problem in the current specification.

How do you develop possible solutions and the prototype?

Synthesising marks how you "develop the possible solutions for" user interfaces, algorithms and data. Generating marks the prototype itself, and at 4-5 it must demonstrate "the proposed relationship between" data and user interfaces.

Develop, don't just identify. This is new in the 2025 advice: "Responses must present work in progress, e.g. evidence of planning or previous iterations of components with annotations or spoken features used to justify possible solutions for user interfaces, algorithms and data."

Use pseudocode for the algorithms. The 2022 report asked for algorithms to be symbolised clearly with annotations. In the 2025 ISMG, Comprehending symbolises user interfaces only and algorithms belong to Synthesising, and the 2025 report says "Pseudocode and other algorithms provide evidence that students have actively shaped solutions".

Make the data do something. The 2025 report asks students to "ensure effective use of the problem-solving process, particularly the Explore phase" so that components "meaningfully use data to solve the identified problem, rather than producing solutions that simply call and display data without addressing the solution purpose".

Show refinement. The 2025 report says evidence may also include annotated "examples before and after refinements".

Do you evaluate in Digital Solutions IA1?

Not as a marked objective. The 2022 to 2025 reports asked for critical evaluation of personal, social and economic impacts against criteria, and for refinements and recommendations justified by testing data. That advice is about 2019-syllabus cohorts, whose IA1 had a Synthesising and evaluating criterion.

Under the 2025 syllabus, objective 7 is not assessed in IA1, and the 2025 report says responses "will not include explicit evidence of evaluation against criteria". The current IA1 specification and ISMG name no recommendations. What stays is:

  • possible impacts, in your analysis of the problem
  • success criteria, which the syllabus defines as the measure for evaluating impacts later
  • refinement, which the 2025 report says evidence may show through annotated before-and-after examples

Evaluation against success criteria is marked in IA2 and IA3; the QCAA Digital Solutions IA2 and IA3 guide covers it.

How long can the IA1 presentation be?

Up to 10 minutes, "including annotations of up to 2000 words". The 2025 report says pseudocode, user-interface sketches, wireframes, data flow diagrams and schemas are not in the word count, while text that explains or justifies is.

The 2022, 2023 and 2024 reports tied top Communicating marks to staying within the length conditions (then 9 to 11 minutes) and told teachers to note the strategy they used when a response ran over. Check your school's policy on what happens past the limit.

The response can be visual, spoken and/or written, so the syllabus does not require narration. The QCAA sample sets its own condition that the presentation "must be recorded". The 2023 report also noted that video quality should not make diagrams or audio illegible.

Reference everything. Communicating includes "referencing conventions". The 2023 and 2024 reports judged referencing separately from symbolisation such as pseudocode, and the 2025 report describes what is expected as a genuine effort, consistent acknowledgment and a reference list.

Is there a QCAA sample Digital Solutions IA1?

Yes, labelled Digital Solutions 2025 v1.3. It is a sample for teachers, not your school's task.

  • Context: you present at an "awards dinner for an open data and computer association symposium".
  • Task: a mobile application using open government data for "senior citizens", focused on "addressing social isolation or community engagement" or "supporting health, wellbeing, or aged care services".
  • Stimulus: four linked sources, a health.gov.au physical activity guideline page and three Queensland and Brisbane open-data pages.
  • Checkpoints: Term 1 Week 3 (problem, data analysis, existing solutions), Week 7 (draft video with script) and Week 10 (final video).

Its scaffolding lists what the proposal must include: a problem statement, a user story, an analysis of existing solutions and datasets, a data story, "success criteria that evaluate the personal, social, and economic impacts of the solution, and the suitability and feasibility", a conceptual model, a low-fidelity non-coded prototype showing the data and user-interface relationship, and references for all data sources. Visual features "should be supported by annotations including labels, bullet-point lists, captions or side notes". The sample prints the same ISMG as the syllabus.

The 2022 to 2025 reports ask schools to name one specific Unit 3 technology context and to set one clear draft checkpoint, and the 2023 to 2025 reports ask for direct links or screenshots of the datasets. The sample does all three, so look for each of them on your task sheet.

QCAA Digital Solutions IA1 exemplars in the subject reports

Every IA1 excerpt in the reports is a video, so none can be reproduced here, and all come from 2019-syllabus cohorts. The 2022 report's video illustrates communication. The 2023 and 2024 videos illustrate the generation of a technical proposal backed by accurate recognition and insightful data analysis, and the 2024 one adds coherent synthesis of data elements. The 2025 report (pp. 14-17) has five short clips, showing:

  • analysis through user personas
  • description of data sources
  • analysis of existing solutions
  • refinements backed by testing evidence
  • evaluation of impacts against criteria

The last of those is objective 7 work, which the 2025 IA1 does not assess.

How did IA1 marks hold up at confirmation?

Confirmation is QCAA checking your school's marking afterwards. In all four reports held (2022 to 2025), confirmed marks fell below the school's provisional marks far more often than above them, and Synthesising and evaluating had the lowest agreement. These are 2019 criteria, so the figures do not map onto the 2025 ISMG.

Synthesising and evaluating2022202320242025
Agreement with provisional marks (%)68.3987.990.9778.32

For how confirmation works across subjects, see the QCE internal assessments guide.

Common mistakes in Digital Solutions IA1

Listing requirements. A list of requirements or criteria sits below one that analyses their significance for user needs, constraints and goals (2025 report). Say why each matters.

Generic user experience. Requirements and symbolisation that could fit any app are generic. Tie each to your identified problem.

Data that only displays. A prototype that calls and displays data without serving its purpose falls short of the 2025 advice. Show what the data does for the user.

Showing one finished idea. The 2025 advice wants possible solutions developed as work in progress. Keep and annotate earlier iterations.

Writing an evaluation section. Evaluation against criteria and recommendations were 2019 IA1 requirements. Spend that time on analysis and synthesis.

Running long. Explanatory text counts towards the 2000 words. Diagrams, wireframes and pseudocode don't.

Weak versus strong wording

The cells describe what the syllabus and the 2025 report distinguish. They are not model sentences.

AreaWeakerStrongerSource
Analysing"list solution requirements or criteria""analyse their significance in relation to user needs, constraints and solution goals"Syllabus p. 37; 2025 report p. 12
Using dataComponents that "simply call and display data"Components that "meaningfully use data to solve the identified problem"Syllabus p. 38; 2025 report p. 13
SynthesisingOne idea per component, identifiedPossible solutions shown as work in progress, with pseudocode, and evidence that may include annotated before and after examplesSyllabus p. 37; 2025 report p. 13
ComprehendingGeneric symbolisationSymbolisation "contextualised to the identified problem"Syllabus p. 36; 2025 report p. 12
CommunicatingOver length, uneven referencingWithin 10 minutes and 2000 words, with consistent acknowledgmentSyllabus p. 35; 2025 report p. 13

Before you submit

  • Is your presentation within 10 minutes, with explanatory text inside 2000 words?
  • Does your prototype use an external data source, and is it non-coded?
  • Does the prototype show the relationship between your data and your user interface?
  • Have you described user-interface components and existing solutions to similar problems?
  • Is every user-experience requirement specific to your problem?
  • Have you analysed why each requirement matters, not just listed it?
  • Are your success criteria determined in your analysis, specific and measurable?
  • Have you covered possible personal, social and economic impacts in your analysis?
  • Do you show earlier iterations and pseudocode for your possible solutions, with annotations?
  • Are diagrams and audio legible in the final file?
  • Is every data source and third-party resource acknowledged, with a reference list?

The QCAA Digital Solutions IA2 and IA3 guide covers the coded solutions that follow in Units 3 and 4, and the QCAA Digital Solutions external exam guide covers the Unit 4 paper.

Practise and get it marked

Practise this IA on AusGrader: sit a prewritten practice IA where your subject has one, or build your own from real QCAA questions, and get it graded against the marking guide with feedback. You can also upload your IA draft for feedback against the ISMG.

Frequently asked questions

How long is the QCE Digital Solutions IA1 presentation?

Up to 10 minutes, including annotations of up to 2000 words. The 2025 subject report says pseudocode, user-interface sketches, wireframes, data flow diagrams and schemas are not counted in the words, but text that explains or justifies is.

Do you write code for Digital Solutions IA1?

No. The syllabus asks for a non-coded, low-fidelity prototype. You still synthesise possible solutions for algorithms, and the 2025 subject report says pseudocode and other algorithms provide evidence that you have actively shaped your solutions.

Do you evaluate your solution in Digital Solutions IA1?

Not as a marked objective. IA1 assesses objectives 1 to 6 and 8, and the 2025 subject report says objective 7 is no longer assessed. Possible impacts still belong in your analysis and success criteria, and the report says evidence may also include annotated examples before and after refinements.

Does the IA1 presentation have to be a recorded video?

The syllabus response is visual, spoken and/or written, so it does not require a set mode. The QCAA sample task says the presentation must be recorded, which is that sample's condition. Your school's task sheet sets yours.

Why do QCAA reports on Digital Solutions IA1 mark Synthesising and evaluating?

The 2022 to 2025 reports describe 2019-syllabus cohorts, when IA1 was worth 20% and marked out of 20 on four criteria. The 2025 marking guide has five criteria and 25 marks, with Synthesising and Generating marked separately.

Sources

  • Digital Solutions 2025 v1.4 General senior syllabus, QCAA, March 2026, pp. 9, 34-38, 49. The IA1 specification, conditions and instrument-specific marking guide, the success criteria definition, and the version history.
  • Digital Solutions 2025 v1.3 IA1: Sample assessment instrument, QCAA, pp. 2-9. A sample for teachers. The source of the senior citizens open-data task described in this guide.
  • Digital Solutions subject report, 2025 cohort, QCAA, pp. 9-17. Commentary on a 2019-syllabus cohort, plus the board's advice on the 2025 syllabus and the confirmation figures.
  • Digital Solutions subject report, 2024 cohort, QCAA, pp. 9-13. Commentary on IA1 under the 2019 syllabus, including its confirmation figures.
  • Digital Solutions subject report, 2023 cohort, QCAA, pp. 10-14. Commentary on IA1 under the 2019 syllabus, including its confirmation figures.
  • Digital Solutions subject report, 2022 cohort, QCAA, pp. 9-14. Commentary on IA1 under the 2019 syllabus, including its confirmation figures.
  • Digital Solutions 2019 v1.2 General Senior Syllabus, QCAA, pp. 40-44. Superseded. Used only to describe the version the subject reports were written about.

Syllabus and assessment material referenced in this guide is © State of Queensland (Queensland Curriculum and Assessment Authority), licensed under CC BY 4.0. See our QCAA licensing notice. AusGrader is an independent study tool and is not affiliated with, endorsed by, or operated by the QCAA.

Keep reading

Practise what you just read

Work through real QCAA Digital Solutions questions and get your written answers marked against the official criteria, instantly.