HSC Industrial Technology exam (NESA): format, Section III and marking
The HSC Industrial Technology written exam is a 40-mark NESA paper with 5 minutes of reading time and 1 hour 30 minutes of working time, and there's a separate paper for each of the six focus areas. Section I is 10 multiple-choice questions (10 marks), Section II is short-answer questions (15 marks), and Section III is one two-part extended response (15 marks) that is the same question on all six focus-area papers, naming your industry where it names one. A NESA-approved calculator is allowed.
This guide describes the written exam on the Industrial Technology Stage 6 Syllabus (2013), drawing on the 2021 to 2025 papers, and that is the syllabus the 2027 HSC sits. The replacement syllabus is first examined in 2029. The written paper is the smaller part of your result: the Major Project carries the other 60 marks, and how the course and its weightings fit together is on the HSC Industrial Technology course page. For the project itself, see the HSC Industrial Technology Major Project guide.
What is the format of the HSC Industrial Technology exam?
The three sections and their question numbers were the same on all 30 papers from 2021 to 2025 (six focus areas, five years). The suggested times and where you answer are as printed on the 2025 Automotive paper.
| Section | Marks | Questions | Where you answer | Suggested time |
|---|---|---|---|---|
| I | 10 | 1 to 10, multiple choice | Separate multiple-choice answer sheet | about 20 minutes |
| II | 15 | 11 to 15, short answer | The spaces on the paper | about 35 minutes |
| III | 15 | 16, one extended response in two parts | A writing booklet | about 35 minutes |
The suggested times add up to the full 90 minutes. By our arithmetic that's a little over 2 minutes a mark, so a 5-mark Section II question gets about 12 minutes.
A few details from the papers and NESA's specification change how you work:
- Section II spaces are a length guide. On the 2025 Automotive paper, the space printed under each question signals roughly how much the examiners expect.
- Show working. The same paper's Section II instructions ask for working in calculation questions.
- Calculator. The covers of all six 2024 papers and the 2025 Automotive paper allow a NESA-approved calculator.
- Section III length. NESA's exam specification puts the Section III response at about 600 words.
Section I is multiple choice on your focus area. NESA publishes no data on how the cohort answered individual multiple-choice questions, so the rest of this guide is about Sections II and III. Exam-room rules for every HSC course are in how to prepare for HSC exams, and your sitting date is in the HSC exam timetable guide.
Is there a different exam for each focus area?
Yes. NESA sets six written papers, each with its own course number:
- Automotive (812)
- Electronics (814)
- Graphics (815)
- Metal and Engineering (816)
- Multimedia (817)
- Timber Products and Furniture (819)
You sit only the paper for your focus area, which is the same one you took in Year 11 and Year 12. Sections I and II are written for that focus area. Section III is the one shared part: it is the same question on all six papers, naming your industry where it names one. The 2021 papers had small wording differences between focus areas, and the 2021 and 2024 questions named no industry at all.
So another focus area's paper gives you extra Section III practice.
How is Section II built?
NESA's specification allows about six short-answer items, with at least one worth 4 to 6 marks. Every paper from 2021 to 2025 used five (Questions 11 to 15), and every paper had at least one item worth 4 or 5 marks.
| Paper | Marks for Q11, Q12, Q13, Q14, Q15 |
|---|---|
| 2021 | 1, 2, 3, 4, 5 |
| 2022 | 1, 2, 3, 4, 5 |
| 2023 | 1, 2, 3, 4, 5 |
| 2024 | 1, 2, 3, 4, 5 (Automotive: 1, 2, 5, 3, 4) |
| 2025 | 2, 2, 2, 4, 5 |
Some item types came up more than once. These lists come from the Marking Feedback and the papers, and NESA notes that feedback isn't given for every question, so treat them as partial.
A calculation. Question 13 was a calculation in five of the six areas in 2021 and 2022 (in Graphics it was a scaled drawing both years), and in all six areas in 2023. The 2023 items covered paint cost, series and parallel resistance, floor area, sheet requirements, a print production cost and finishing cost. In 2025 the calculations were Automotive Q11 (paint cost) and Electronics Q14 (power and current for appliances). The 2024 feedback names no Section II calculation.
Graphics drawing tasks. Oblique cabinet projection (2023 Q14). Dimensioning a curve and a circle and drawing a metric thread to AS 1100 (2024 Q12 and Q13). An auxiliary view (2024 Q14). Mechanical against measuring-point perspective, with a diagram (2024 Q15). An isometric drawing from orthogonal views (2025 Q14). A sectioned part with an unhatched web and a key (2025 Q15).
Automotive regulations. A NSW regulation item appeared in each of 2023, 2024 and 2025: registration documents and reportable modifications (2023), child restraints (2024) and a named statutory regulation (2025). Alongside them sat component and process items, such as reasons for an oil change and replacing a cylinder head (2023), the oxygen sensor and transmission noises (2024), and engine components and design factors (2025).
How is Section II marked?
The Automotive Marking Guidelines for 2023, 2024 and 2025 are the only ones described here. We haven't read the guidelines for the other five focus areas, so we can't say how their items were split. Treat what follows as examples, not rules for every paper.
- 2-mark items. In 2025 Automotive Q12 and Q13 and in 2023 Automotive Q12, full marks went to an answer that gave the outline the question asked for, and 1 mark to some relevant information.
- A 2-mark calculation. 2025 Automotive Q11 (paint cost) gave 2 marks for the correct cost and 1 mark for some relevant information.
- A 5-mark item with two named ideas. 2025 Automotive Q15 asked you to explain what influences car design in terms of functionality and sustainability. The ladder ran from 5 for explaining both, to 4 for describing both, 3 for outlining either or both, 2 for some understanding of what drives design, and 1 for something relevant. An answer that covered only one of the two ideas could not get past 3.
That last ladder is the useful one. When a question names two things, the top marks need both, at the level the key word asks for. For what each NESA key word means, see HSC key words.
What does Section III ask?
Question 16 is one structured response in two parts, (a) and (b), on the industry connected to your focus area. The theme changed in every year from 2021 to 2025:
| Paper | Parts (a), (b) | Theme | Key words | Scenario supplied |
|---|---|---|---|---|
| 2021 | 5, 10 marks | Industrial relations issues, then careers and training, after a company changes how it operates | describe, explain | One sentence about a company |
| 2022 | 5, 10 marks | Work health and safety law, then strategies that make a workplace safer | describe, explain | One sentence about a company |
| 2023 | 3, 12 marks | One new technology, then the impact of mass production and automation | describe, discuss | None |
| 2024 | 5, 10 marks | Two firms owned and managed differently: their marketing and advertising, then their production and efficiency | compare, analyse | A longer description of both firms |
| 2025 | 5, 10 marks | Environmental law and sustainable practice, then historical developments in manufacturing | describe, analyse | None |
The scenario column is from the Automotive papers.
Two things follow from that table. No theme repeated, so don't build your preparation around a guess at the 2027 topic. And the key word in part (b) moved from explain to discuss to analyse over five papers, so practise answering more than one kind of task.
How is Section III marked?
Again, these bands come from the Automotive Marking Guidelines. The question is shared, but we have only read the Automotive marking for it.
Part (a), 5 marks (2024 and 2025). Five bands in both years. In 2024 the bands ran from a comprehensive comparison to a sound one, a description, some understanding and relevant information; in 2025 from a detailed description to a description, an outline, some understanding and relevant information. In 2024, part (a) was a compare question. Both of the top two bands needed you to set out differences between the two firms. Describing each firm on its own landed in the 3-mark band.
Part (b), 10 marks. In the 2025 guideline the bands were 9 to 10, 7 to 8, 5 to 6, 3 to 4 and 1 to 2:
| Band | What separated it (2025 Automotive guideline, our words) |
|---|---|
| 9 to 10 | A comprehensive analysis, with industry examples built into it |
| 7 to 8 | A sound analysis that refers to examples |
| 5 to 6 | An analysis of only one of the two strands named in the question, or a description with some examples |
The two strands in 2025 were historical developments and advancements. Covering one of them well still stopped at 6 of 10.
2023 was split differently. Part (a) was 3 marks and part (b) 12, with bands of 11 to 12, 8 to 10, 5 to 7 and 3 to 4, and a lowest band for some relevant information. Detailed examples from industry were named in the 8 to 10 band, and examples woven through the answer in the top band.
What do markers say costs marks in HSC Industrial Technology?
NESA's Marking Feedback for 2021 to 2025 covers the whole written exam, with Section II notes given by focus area. These are the problems it raised in more than one year, in our words.
Drifting from what Question 16 names. In the 2021, 2022, 2023 and 2025 feedback, markers saw Section III answers move off the question's own terms: writing about production output where safety was asked, listing pros and cons where impacts were asked, or covering one strand where the question named two.
Loose terminology. Correct industry terms were raised in all five years, including 2021 Electronics Q12, the 2022 Section III, 2023 Multimedia Q11 and Q12 and Timber Q11, 2024 Multimedia Q11 to Q13 and Timber Q11, and 2025 Metal and Engineering Q13 and Q14. The 2023 and 2025 general feedback raised it too.
Calculations without method. The general feedback from 2021 to 2024 asked for full working in calculations, and from 2022 to 2024 to expect calculations that need a calculator. Calculation items drew comments on method and working for Q13 in 2021, 2022 and 2023, and for Automotive Q11 and Electronics Q14 in 2025.
Too little for the marks. Answers gave one point, or too little depth, where the marks called for more: 2021 Automotive Q15 and Timber Q12, 2022 Automotive Q15 and Metal and Engineering Q12, 2024 Metal and Engineering Q14, and 2025 Multimedia Q14 and Q15.
Dot points where the question says describe. A list of steps or points in place of a connected description was flagged in 2021 Q16(a), 2023 Multimedia Q14, 2024 Multimedia Q15 and 2025 Timber Q15.
An unplanned Section III. The feedback from 2021 to 2024 asked for planned, structured part (b) answers: fewer strategies covered in more depth (2021), an introduction and a conclusion (2022), and in 2024 an answer to (b) that stands up without leaning on part (a).
Focus-area specifics. Graphics answers lost marks on AS 1100 drawing conventions in 2024 (Q12, Q13) and 2025 (Q15). Automotive answers needed firmer knowledge of NSW and statutory regulations in 2023 (Q11, Q12), 2024 (Q12) and 2025 (Q12).
The general feedback in each year from 2021 to 2025 also told students to read the whole question and answer every part of it.
What separates a weaker answer from a stronger one?
These pairs describe what answers did, taken from the Automotive guideline ladders and the feedback above. They aren't NESA sample answers.
| Weaker | Stronger | Where it comes from |
|---|---|---|
| Outlines how functionality shapes a car's design | Explains how both functionality and sustainability shape it | 2025 Automotive Q15 ladder: one idea caps the answer at 3 of 5 |
| Describes each firm in turn | Sets the two firms side by side and states how they differ | 2024 Q16(a) Automotive guideline: description alone sits in the 3-mark band of 5 |
| Analyses historical developments only | Analyses both historical developments and advancements | 2025 Q16(b) Automotive guideline: one strand sits in the 5 to 6 band of 10 |
| Mentions examples from industry in general | Builds examples from your own focus industry into each point | Section III feedback 2021 to 2025; 2023 and 2025 Automotive guideline bands |
| Names a strategy | Names the strategy and says what it changes | 2021 and 2022 Q16(b) feedback |
| Lists the steps as dot points | Describes the process in connected sentences | Feedback, 2021 Q16(a), 2023 Multimedia Q14, 2024 Multimedia Q15, 2025 Timber Q15 |
| Some relevant information, no correct cost | The correct paint cost, with the working | 2025 Automotive Q11 guideline: 1 mark against 2 |
How should you prepare for the HSC Industrial Technology exam?
- Sit your focus area's papers at the suggested times. 20 minutes, then 35, then 35. Every paper from 2021 to 2025 was set on the syllabus you're sitting. The papers and their Marking Guidelines are on NESA's exam pack pages; the HSC past papers guide explains where to find them, and HSC trial exams covers trial papers.
- Mark Section II against the guidelines. Find the rung you reached. If the question named two ideas and you covered one, or you outlined where it said explain, that's the fix.
- Practise calculations with working. Write the method, then the answer, on cost, area, material and circuit items for your focus area.
- Write Section III answers to all five past themes. The question is shared, so the Section III from any focus area's paper works, with your own industry swapped in. Practise the compare and analyse tasks as well as describe and explain.
- Build a bank of examples from your industry study. The feedback asked for examples from your own focus industry in all five years, and the top bands asked for them inside the analysis.
- Plan before you write. The general feedback each year asked students to use a scaffold when planning an extended response, to work with any stimulus supplied, and to treat the answer space as a length guide.
- Draw where it helps. The 2022 to 2025 general feedback named diagrams as a help to answers, and in 2021 it suggested graphical solutions.
Frequently asked questions
Do I sit a different Industrial Technology exam for my focus area?
Yes. NESA sets six separate written papers, one each for Automotive, Electronics, Graphics, Metal and Engineering, Multimedia, and Timber Products and Furniture. You sit only the paper for the focus area you studied. Sections I and II are specific to that area, while Section III is the same question on all six papers, naming your industry where it names one (with small wording differences in 2021).
How many multiple-choice questions are in the HSC Industrial Technology exam?
Ten, numbered 1 to 10, for 10 of the paper's 40 marks. They are specific to your focus area and go on a separate answer sheet. The paper suggests about 20 minutes for them.
Can I use a calculator in the HSC Industrial Technology exam?
Yes, a NESA-approved calculator. The cover of every 2024 paper and of the 2025 Automotive paper says so. Section II has often included a calculation, such as Question 13 in most focus areas from 2021 to 2023, and the 2025 paper asks you to show working in calculation questions.
Can I predict the Section III topic for the 2027 HSC?
No. The Section III theme was different in each of the five papers from 2021 to 2025, ranging from industrial relations and careers to workplace safety, new technology, two contrasting firms, and environmental law with manufacturing history. Prepare for any theme.
Are the 2021 to 2025 Industrial Technology papers still useful for the 2027 HSC?
Yes. All five years were set on the Industrial Technology Stage 6 Syllabus (2013), which the 2027 HSC still sits. NESA has announced no format change for 2027, and the replacement syllabus is first examined in the 2029 HSC.
Sources
- Assessment and reporting in Industrial Technology, NESA, 2026, HSC exam specifications, Written Paper (40 marks). The 40-mark paper, one per focus area, its three sections and the length of the Section III response. Paraphrased.
- Industrial Technology Stage 6 Syllabus (2013) course page, NESA, 2026, About the course; Course numbers and exclusions. The six focus areas and their HSC course numbers.
- Industrial Technology 11-12 Syllabus (2026) overview, NESA, 2026, Implementation from 2028. When the replacement syllabus is taught and first examined.
- HSC Industrial Technology Examination, NESA, 2025, 2021 to 2025 papers, all six focus areas: covers, marks per question, Section III question; 2025 Automotive pp. 1-9. Section layout, suggested times, marks per question and the Section III theme for each year. Questions are described, not reproduced.
- HSC Industrial Technology Marking Guidelines, Automotive, NESA, 2025, 2025 pp. 1-8; 2024 pp. 1-7; 2023 pp. 1-6. How marks were split on named Section II items and the Section III bands, described in our own words. Criteria and sample answers are not reproduced.
- HSC Marking Feedback: Industrial Technology, NESA, 2025, Feedback on written exam, 2021 to 2025. Markers' commentary on the written exam for five cohorts, by focus area for Section II. Paraphrased.
Syllabus and assessment material referenced in this guide is used under licence, © Copyright NSW Education Standards Authority. See our NESA licensing notice. The NSW Education Standards Authority (NESA) does not endorse this product or service. NESA takes no responsibility for any errors in the reproduction of NESA Materials. Any sample examination papers or model answers accompanying the NESA Materials are not part of the NESA Materials and are in no way endorsed or authorised by NESA.